- Heavy Structure frame and Gantry supports are made from Graded Casting to sustain loads and vibrations during operating condition.
- Mechanism is made from EN-31 material and coated to reduce wear and tear.
- Whole body will be one piece fabricated and machined on Plano miller, Sand blasted and Powder coated.
- T-Slot Table provided to clamp raw material.
- All well-known international brands’ spare parts used to achieve long life stability, high accuracy and best performance.
- XYZ axis stands on linear ball bearing profile rails.
- Easy Lubricating system for mechanism.
Application
Mainly used for Pattern Makers, advertising industry, Indore and outdoor signs, wood furniture industry like processing wood door, cabinet door, art and craft door, 2Dand 3D designs, MDF engraving, wood board engraving . This machine can be used for MDF, Plywood, PVC, Foam Guards, Waving Boards, ACP and Hardwood, Acrylic.
Specification
Model | KP-2030 |
Working Area | 2000 X 3000 X 600 mm |
Transmission | X,Y with Rack and Pinion and Z-axis Transmit with ball screw.3 LM on X axis and single LM on Y axis |
Ball Screw | High Precision Ball Screw ( Make: PMI) Taiwan |
Linear Guide | LM-30 , ( Make: PMI) Taiwan |
Spindle power & Cooling Medium. | 13.5KW, HSD Italian |
Spindle Speed | 18000 R.P.M. |
Max Travelling Speed | 25 metre/ min |
Max working Speed | 20 metre/min |
Drive Motor | 4 nos. of Servo Motor and Drive, Make : Delta, 1.5KW |
Weight | 2000 Kg |
Sensors | Make : Atonics, Korea |
Transmission Cable and Drag chain | IGUS ( Made In German) 10 million cycle and 3 year of replacement warranty for cables |
Spindle Inverter | Make : Delta, Taiwan |
Power Supply | AC 380-410/3 PH/50 HZ +Neutral and Earthing. |
Controls | Make : NC 300 |
Working Command | G- Code |