• Heavy Structure Frame And Gantry Supports Are Made From Graded Casting To Sustain Loads And Vibrations During Operating Condition.
  • Mechanism Is Made From En-31 Material And Coated To Reduce Wear And Tear.
  • Whole Body Will Be One Piece Fabricated And Machined On Plano Miller, Sand Blasted And Powder Coated.
  • All Well-Known International Brands’ Spare Parts Used To Achieve Long Life Stability, High Accuracy And Best Performance.
  • Xyz Axis Stands On Linear Ball Bearing Profile Rails.
  • Easy Lubricating System For Mechanism.


Plasma Cutting Is A Process That Cuts Through Electrically Conductive Materials By Means Of An Accelerated Jet Of Hot Plasma. Typical Materials Cut With A Plasma Torch Include Steel, Stainless Steel, Aluminum, Brass And Copper, Although Other Conductive Metals May Be Cut As Well.


Model Kpz-1530
Input Voltage 200 – 240 V, 1-Ph,
480 V, 3-Ph,
Frequency 60/50 Hz
Effective Cutting Area X Axis: 1500Mm, Y Axis: 3000Mm.
Running Speed 20-4000Mm/Min.
Cutting Speed( By Plasma Cutting) 20-3500Mm/Min.
Cutting Speed 20-750Mm/Min.
Cutting Thickness 5 Mm To 32 Mm.
Cutting Thickness According To The Plasma Power.
Controller Weihong Advance Control System
Drive Motor  Leadshine (Easy Servo) Or Stepper
Manual Cutting Up And Down Device Standard Stroke 100Mm.
Thc (Auto Plasma Height Control System) Standard Stroke 80Mm.
Linear Guide

Rack & Pinion

Pmi Or Hiwin (Made In Taiwan )
Plasma Source Hypertherm  Powermax  ( Usa)