- Variable Feed Speed Of Edge Banding.
- Swivel Bar Roller Support For Big Width Work Piece.
- Aluminum Glue Pot With Covering Heat Insulation Material.
- Foot And Micro Cutting System For Edge Cutting.

Application
Manual Edge Bander To Apply The Edge Into Straight Profiles Of Shaped Panels .Applicable Banding Material In Coils: Thin Edge And Pvc Up To 3 Mm

Specification
Model | Kmb -1050 |
Maximum Thickness Of Work Piece | 10 To 50 Mm
|
Tape Thickness | 0.4 To 3 Mm |
Glue Pot Capacity | 2 Kgs. Approx |
Heating Element | 3 Kw |
Tape Cutting Mechanism | Pneumatic |
Control Of Tape Cutting | Micro/Foot Switch |
Working Speed Per Minute | 0 To 10Mts(Variable) |
Motor | 1 Hp |
Air Pressure | 5 To 7 Kg/Cm^2 |
Tape Coil Dia | 525 Mm |